How to maintain the single-sided machine

How to maintain the single-sided machine:

Clean the surface and groove of the corrugated roll every day, check whether it is damaged, not sharp enough, and there are gaps at the edge of the groove, and prevent the hard lumps of paste starch from settling. Once the roller is in centrifugal condition - it can be determined by hearing the sound of its stop operation, the outflow of steam and condensate should be checked and adjusted.

Regularly check the operation of the corrugated roll. Check whether the gluing unit is clean, whether the colloid can flow smoothly, and whether all rollers are parallel (from the gluing roller to the corrugated roller), and check the flow of various gel again. At the same time, clean the paste tray and circulation pipeline with water, and use steam to remove the paste agglomeration.

Because paste starch is made from natural substances, it is very easy to breed bacteria. On machines with guide jaws, the guide jaws must be checked several times a day. On the hot machine, the preset guide claw can be used for adjustment. At this time, it is also necessary to pay attention to the roll claws of the gluing equipment. Pay attention to the operation and maintenance of the corrugated roll, mainly according to the material and surface coating of the corrugated roll, and according to the operating instructions. In order to maintain linear contact, the roll should have at least one crown, and its wear should be checked regularly. At the same time, check the condition of the roller surface treatment. If a large amount of narrow paper is processed, check whether there is "ladder wear" on the outside of the roll, and take correct remedial measures, such as suspension of use, grinding paste can be used if necessary. "Ladder wear" usually does not occur on the roll with tungsten carbide as the surface coating, while for chrome plated roll, grinding should be avoided. However, "ladder wear" will occur on hard steel rolls and seriously hinder the operation of the equipment, especially when processing low-weight paper.